Field Assistant

Dr Epoxy

Mobile-first epoxy training, visual diagnosis, and voice guidance for installers in the field.

Midnight BlueSafety OrangeSlateCarbon

Training Modules

Structured curriculum from intro to troubleshooting and safety.

Visual references blend field stock imagery with MF context so crews can train against real-world scenarios.

Surface Profiling

Surface Profiling

Correct Mixing

Correct Mixing

Even Application

Even Application

PPE Compliance

PPE Compliance

Standard Install Sequence

1. Floor Cleaning2. Crack & Hole Repair3. Surface Profile (Grind/Etch)4. Moisture Testing5. Primer Application6. Mix Resin + Hardener7. First Coat8. Decorative Layer (Optional)9. Second Coat10. Topcoat (Optional)11. Full Curing

Floor Prep Rules

  • Never coat wet or contaminated substrate.
  • Use mechanical profile for adhesion.
  • Vacuum and degrease before primer.

Mixing Rules

  • Match manufacturer resin:hardener ratio.
  • Mix until homogeneous with no streaking.
  • Avoid whipping in air during mixing.

Application & Environment

  • Keep wet edge and avoid thick puddles.
  • Allow full cure before second coat.
  • Target 60-85°F and avoid high humidity.
Introduction to Epoxy reference
Introduction to Epoxy training tip visual

Process Steps

  1. Understand how resin + hardener form a chemical bond.
  2. Match system type to traffic, chemicals, and UV exposure.
  3. Plan cure windows around project schedule and occupancy.

Tools & Materials

Product data sheetsCoverage calculatorSite log

Safety Checklist

Read SDSVentilation planEmergency wash access